---
title: "Configuration Procedures (UI)"
slug: "kproxy-migration-configuration"
description: "Configure Flow and SNMP collection in the Kentik portal with our step-by-step guide for seamless data management and monitoring."
updated: 2026-05-11T17:47:18Z
published: 2026-05-11T17:47:18Z
---

> ## Documentation Index
> Fetch the complete documentation index at: https://kb.kentik.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Configuration Procedures (UI)

Follow these steps in the Kentik portal to configure Flow and SNMP collection via the Universal Agent.

1. [**Access Agent Configuration for Capability Install**](/v1/docs/kproxy-migration-configuration#access-agent-configuration-for-capability-install)
2. [Configure Flow Proxy Capability](/v1/docs/kproxy-migration-configuration#configure-flow-proxy-capability)
3. [Configure SNMP/ST Capability](/v1/docs/kproxy-migration-configuration#configure-snmpst-capability)

## Install Agent Capabilities

1. Log in to the Kentik portal and navigate to **Settings »** **Universal Agents**.
2. Identify the target agent in the list, then click it to open the management panel.
3. Click **Install******next to the capability you wish to install.

## Configure Flow Proxy Capability

1. In **Settings »** **Universal Agents**, select **Flow Proxy** from the capability list.
2. Click the **Edit** button to configure the following [**parameters**](/v1/docs/universal-agents#configure-the-flow-proxy-capability):
  - Host: The local IP address (default `0.0.0.0`).
  - Port: The UDP port for incoming telemetry (e.g., `9995`).
  - Site: The site associated with this data.
  - My Network: The internal network boundary definition.
3. Click **Save**.

## Configure SNMP/ST Capability

1. Navigate to **Settings »********Networking********Devices**.
2. Click the device name from the list you wish to configure.
3. In the top right of the device page, select the gear icon.
4. Select the **SNMP** tab and configure the enrichment settings as described in the menu:
  1. **Credentials:**Create a new [**credential**](/v1/docs/credentials-vault) or use an existing credential.
  2. **Collection Agent:**Select the Kentik agent to collect ST data.
  3. **Monitoring Template:**Choose a template to be applied for SNMP monitoring.
  4. **Device SNMP IP:**Enter the IP that Kentik should use to connect to your SNMP Device.
  5. **Port:**Enter a port number for SNMP polling of your device.
5. Click **Save**.

## Related

- [Universal Agents](/universal-agents.md)
- [Kentik Proxy Agent](/kentik-proxy-agent.md)