Device Configs Directory

Prev Next

This article lists configurations for your network infrastructure devices (routers, switches, etc.) to work with Kentik.

Note:

  • Before using these configurations, read the README at https://github.com/kentik/config-snippets.

  • Some repo directories also have vendor-specific READMEs providing important background information.

  • These directories may also list ("Tested Compatible Platforms") when that platform’s compatibility has been confirmed in a Kentik production environment.

Arista Device Configs

The File column lists the example configurations available in the GitHub repository at
https://github.com/kentik/config-snippets/tree/master/Arista.

Type

Description

File

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

sflow.conf

Flow

Configure each interface that will send sampled flow (directly or via agent).

sflow-interfaces.conf

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

sflow-agent.conf

Cisco Device Configs

Here are some example configurations for various Cisco device series.

Cisco 6500-7600 Configs

The example configurations listed in the File column are located at https://github.com/kentik/config-snippets/tree/master/Cisco/6500-7600.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

netflow-9-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

netflow-9.conf

Flow

Configure each interface that will send sampled flow (directly or via agent).

netflow-9-interfaces.conf

BGP

Configure router for BGP peering with Kentik.

bgp.conf

SNMP

Configure router to enable SNMP polling by Kentik.

snmp.conf

Flowspec

Configure an MP-BGP router to be a flowspec receiver.

flowspec.conf

Note: Consult the notes in the README file at the same location.

Cisco ASA Configs

The example configurations listed in the File column are located at https://github.com/kentik/config-snippets/tree/master/Cisco/ASA.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

netflow-9-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

netflow-9.conf

SNMP

Configure router to enable SNMP polling by Kentik.

snmp.conf

Cisco Nexus 3000 Configs

The example configurations listed in the File column are located at https://github.com/kentik/config-snippets/tree/master/Cisco/Nexus-3000.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

sflow-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

sflow.conf

Cisco Nexus 6000-7000 Configs

The example configurations listed in the File column are located at https://github.com/kentik/config-snippets/tree/master/Cisco/Nexus-6000-7000.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

netflow-9-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

netflow-9.conf

Flow

Configure each interface that will send sampled flow (directly or via agent).

netflow-9-interfaces.conf

Cisco IOS XE Configs

The example configurations listed in the File column are located at https://github.com/kentik/config-snippets/tree/master/Cisco/IOS-XE.

Type

Description

File

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

netflow-9.conf

Flow

Configure each interface that will send sampled flow (directly or via agent).

netflow-9-interfaces.conf

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

netflow-9-agent.conf

BGP

Configure router for BGP peering with Kentik.

bgp.conf

Cisco IOS XR Configs

The example configurations listed in the File column are located at https://github.com/kentik/config-snippets/tree/master/Cisco/IOS-XR.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

netflow-9-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

netflow-9.conf

Flow

Configure each interface that will send sampled flow (directly or via agent).

netflow-9-interfaces.conf

BGP

Configure router for BGP peering with Kentik.

bgp.conf

SNMP

Configure router to enable SNMP polling by Kentik.

snmp.conf

Flowspec

Configure an MP-BGP router to be a flowspec receiver.

flowspec.conf

Extreme Device Configs

The File column lists the example configurations available on GitHub at
https://github.com/kentik/config-snippets/tree/master/Extreme.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

sflow-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

sflow.conf

Flow

Configure each interface that will send sampled flow (directly or via agent).

sflow-interfaces.conf

BGP

Configure router for BGP peering with Kentik.

bgp.conf

     

Huawei Device Configs

The File column lists the example configurations available in GitHub at
https://github.com/kentik/config-snippets/tree/master/Huawei.

Type

Description

File

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

netflow-9.conf

Flow

Configure each interface that will send sampled flow (directly or via agent).

netflow-9-interfaces.conf

Flow

Configure each line card that will send flow to Kentik (directly or via agent).

netflow-9-linecards.conf

BGP

Configure router for BGP peering with Kentik.

bgp.conf

SNMP

Configure router to enable SNMP polling by Kentik.

snmp.conf

Juniper Device Configs

Here are some example configurations for various series of Juniper devices.

Juniper MX Series Configs

The example configurations listed in the File colum are located at https://github.com/kentik/config-snippets/tree/master/Juniper/MX-series.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

ipfix-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

ipfix.conf

Flow

Configure each interface that will send sampled flow (directly or via agent).

ipfix-interfaces.conf

Flow

Configure each line card that will send flow to Kentik (directly or via agent).

ipfix-linecards.conf

BGP

Configure router for BGP peering with Kentik.

bgp.conf

SNMP

Configure router to enable SNMP polling by Kentik.

snmp.conf

Flowspec

Configure an MP-BGP router to be a flowspec receiver.

flowspec.conf

Note: Consult the notes in the README file at the same location.

Juniper QFX/EX Series Configs

The example configurations listed in the File column are located at https://github.com/kentik/config-snippets/tree/master/Juniper/QFX_EX-series.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

sflow-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

sflow.conf

BGP

Configure router for BGP peering with Kentik.

bgp.conf

SNMP

Configure router to enable SNMP polling by Kentik.

snmp.conf

Note: Consult the notes in the README file at the same location.

Nokia Device Configs

The File column lists the example configurations available in GitHub at
https://github.com/kentik/config-snippets/tree/master/Nokia.

Type

Description

File

SNMP

Configure router to enable SNMP polling by Kentik.

snmp.conf

Notes: Consult the notes in the README file at the same location.

Palo Alto Device Configs

The File column lists the example configurations available in GitHub at
https://github.com/kentik/config-snippets/tree/master/Palo-Alto.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

netflow-9-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

netflow-9.conf

Vyatta Device Configs

The File column lists the example configurations available in GitHub at
https://github.com/kentik/config-snippets/tree/master/Vyatta.

Type

Description

File

Flow

Configure router to push flow to the Kentik Proxy Agent (kproxy).

sflow-agent.conf

Flow

Configure router to push flow data directly to the Kentik Data Engine (rather than via kproxy).

sflow.conf


© 2014-25 Kentik